China Customized Jaw Spider Couplings Jaw-Type Curved Jaw Coupling coupling cast

Solution Description

1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111

Merchandise No. φD L L1 W M Tighten the strength(N.m)
SG7-eleven-30- 30 fifty 18.five 13 M3(4) one.2
SG7-11-forty- forty 66 twenty five sixteen M4(6) two.seven
SG7-eleven-fifty five- fifty five seventy eight thirty eighteen M5(4) 6
SG7-11-65- sixty five ninety 35 twenty M5(6) six
SG7-11-eighty- 80 114 45 24 M6(8) ten
SG7-eleven-95- 95 126 50 26 M8(4) 35
SG7-eleven-105- one zero five one hundred forty fifty six 28 M8(4) 35

111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111

Item No. Rated torque Greatest Torque Max Pace Inertia Instant N.m rad Tilting Tolerance Finish-play Weight:(g)
SG7-eleven-30- 7.4N.m fourteen.8N.m 20000prm eight.7×10-4kg.m² 510N.m/rad 1.0c +.6mm fifty
SG7-eleven-forty- 9.5N.m 19N.m 15000prm 1.12×10-3kg.m² 550N.m/rad one.0c +.8mm one hundred twenty
SG7-eleven-fifty five- 34N.m 68N.m 13000prm four.5×10-3kg.m² 1510N.m/rad 1.0c +.8mm 280
SG7-eleven-65- 95N.m 190N.m 10500prm nine.1×10-3kg.m² 2800N.m/rad one.0c +.8mm 450
SG7-11-80- 135N.m 270N.m 8600prm 1.9×10-2kg.m² 3600N.m/rad 1.0c +1.0mm 960
SG7-eleven-ninety five- 230N.m 460N.m 7500prm two.2×10-2kg.m² 4700N.m/rad 1.0c +1.0mm 2310
SG7-eleven-one hundred and five- 380N.m 760N.m 6000prm 3.3×10-2kg.m² 5800N.m/rad one.0c +1.0mm 3090

US $71-130
/ Piece
| 		5 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard
Shaft Hole: 2-45mm
Torque: 1-860n.M
Bore Diameter: 14-105mm
Speed: 19000-5500rpm
Structure: Rigid

###

Item No. φD L L1 W M Tighten the strength(N.m)
SG7-11-30- 30 50 18.5 13 M3(4) 1.2
SG7-11-40- 40 66 25 16 M4(6) 2.7
SG7-11-55- 55 78 30 18 M5(4) 6
SG7-11-65- 65 90 35 20 M5(6) 6
SG7-11-80- 80 114 45 24 M6(8) 10
SG7-11-95- 95 126 50 26 M8(4) 35
SG7-11-105- 105 140 56 28 M8(4) 35

###

Item No. Rated torque Maximum Torque Max Speed Inertia Moment N.m rad Tilting Tolerance End-play Weight:(g)
SG7-11-30- 7.4N.m 14.8N.m 20000prm 8.7×10-4kg.m² 510N.m/rad 1.0c +0.6mm 50
SG7-11-40- 9.5N.m 19N.m 15000prm 1.12×10-3kg.m² 550N.m/rad 1.0c +0.8mm 120
SG7-11-55- 34N.m 68N.m 13000prm 4.5×10-3kg.m² 1510N.m/rad 1.0c +0.8mm 280
SG7-11-65- 95N.m 190N.m 10500prm 9.1×10-3kg.m² 2800N.m/rad 1.0c +0.8mm 450
SG7-11-80- 135N.m 270N.m 8600prm 1.9×10-2kg.m² 3600N.m/rad 1.0c +1.0mm 960
SG7-11-95- 230N.m 460N.m 7500prm 2.2×10-2kg.m² 4700N.m/rad 1.0c +1.0mm 2310
SG7-11-105- 380N.m 760N.m 6000prm 3.3×10-2kg.m² 5800N.m/rad 1.0c +1.0mm 3090
US $71-130
/ Piece
| 		5 Pieces

(Min. Order)

###

Standard Or Nonstandard: Nonstandard
Shaft Hole: 2-45mm
Torque: 1-860n.M
Bore Diameter: 14-105mm
Speed: 19000-5500rpm
Structure: Rigid

###

Item No. φD L L1 W M Tighten the strength(N.m)
SG7-11-30- 30 50 18.5 13 M3(4) 1.2
SG7-11-40- 40 66 25 16 M4(6) 2.7
SG7-11-55- 55 78 30 18 M5(4) 6
SG7-11-65- 65 90 35 20 M5(6) 6
SG7-11-80- 80 114 45 24 M6(8) 10
SG7-11-95- 95 126 50 26 M8(4) 35
SG7-11-105- 105 140 56 28 M8(4) 35

###

Item No. Rated torque Maximum Torque Max Speed Inertia Moment N.m rad Tilting Tolerance End-play Weight:(g)
SG7-11-30- 7.4N.m 14.8N.m 20000prm 8.7×10-4kg.m² 510N.m/rad 1.0c +0.6mm 50
SG7-11-40- 9.5N.m 19N.m 15000prm 1.12×10-3kg.m² 550N.m/rad 1.0c +0.8mm 120
SG7-11-55- 34N.m 68N.m 13000prm 4.5×10-3kg.m² 1510N.m/rad 1.0c +0.8mm 280
SG7-11-65- 95N.m 190N.m 10500prm 9.1×10-3kg.m² 2800N.m/rad 1.0c +0.8mm 450
SG7-11-80- 135N.m 270N.m 8600prm 1.9×10-2kg.m² 3600N.m/rad 1.0c +1.0mm 960
SG7-11-95- 230N.m 460N.m 7500prm 2.2×10-2kg.m² 4700N.m/rad 1.0c +1.0mm 2310
SG7-11-105- 380N.m 760N.m 6000prm 3.3×10-2kg.m² 5800N.m/rad 1.0c +1.0mm 3090

What Is a Coupling?

A coupling is a mechanical device that links two shafts together and transmits power. Its purpose is to join rotating equipment while permitting a small amount of misalignment or end movement. Couplings come in a variety of different types and are used in a variety of applications. They can be used in hydraulics, pneumatics, and many other industries.
gearbox

Types

Coupling is a term used to describe a relationship between different modules. When a module depends on another, it can have different types of coupling. Common coupling occurs when modules share certain overall constraints. When this type of coupling occurs, any changes to the common constraint will also affect the other modules. Common coupling has its advantages and disadvantages. It is difficult to maintain and provides less control over the modules than other types of coupling.
There are many types of coupling, including meshing tooth couplings, pin and bush couplings, and spline couplings. It is important to choose the right coupling type for your specific application to get maximum uptime and long-term reliability. Listed below are the differences between these coupling types.
Rigid couplings have no flexibility, and require good alignment of the shafts and support bearings. They are often used in applications where high torque is required, such as in push-pull machines. These couplings are also useful in applications where the shafts are firmly attached to one another.
Another type of coupling is the split muff coupling. This type is made of cast iron and has two threaded holes. The coupling halves are attached with bolts or studs.
gearbox

Applications

The coupling function is an incredibly versatile mathematical tool that can be used in many different scientific domains. These applications range from physics and mathematics to biology, chemistry, cardio-respiratory physiology, climate science, and electrical engineering. The coupling function can also help to predict the transition from one state to another, as well as describing the functional contributions of subsystems in the system. In some cases, it can even be used to reveal the mechanisms that underlie the functionality of interactions.
The coupling selection process begins with considering the intended use of the coupling. The application parameters must be determined, as well as the operating conditions. For example, if the coupling is required to be used for power transmission, the design engineer should consider how easily the coupling can be installed and serviced. This step is vital because improper installation can result in a more severe misalignment than is specified. Additionally, the coupling must be inspected regularly to ensure that the design parameters remain consistent and that no detrimental factors develop.
Choosing the right coupling for your application is an important process, but it need not be difficult. To find the right coupling, you must consider the type of machine and environment, as well as the torque, rpm, and inertia of the system. By answering these questions, you will be able to select the best coupling for your specific application.
gearbox

Problems

A coupling is a device that connects two rotating shafts to transfer torque and rotary motion. To achieve optimal performance, a coupling must be designed for the application requirements it serves. These requirements include service, environmental, and use parameters. Otherwise, it can prematurely fail, causing inconvenience and financial loss.
In order to prevent premature failure, couplings should be properly installed and maintained. A good practice is to refer to the specifications provided by the manufacturer. Moreover, it is important to perform periodic tests to evaluate the effectiveness of the coupling. The testing of couplings should be performed by qualified personnel.
China Customized Jaw Spider Couplings Jaw-Type Curved Jaw Coupling coupling castChina Customized Jaw Spider Couplings Jaw-Type Curved Jaw Coupling coupling cast
editor by czh 2022-12-29